Screw Stepper Motor
What is a Screw Stepper Motor?
A screw stepper motor is an integrated linear drive unit that combines a hybrid stepper motor with a precision lead screw. Eliminating the need for external components like couplings or separate lead-screw mounts, it converts pulse signals directly into linear reciprocating motion. By utilizing pulse micro-stepping, it achieves high-precision positioning with fine step increments. The unit features inherent self-locking capabilities, a compact design, and straightforward control logic. It supports various configurations-such as through-shaft or externally driven designs-with customizable lead-screw lengths, leads, and nut types. Ideally suited for applications requiring short-to-medium travel and light-load precision linear positioning, it serves as a cost-effective solution for XYZ fine-adjustment platforms, inspection fixtures, and small-scale lifting mechanisms.




1. Integrated Design for Reduced Mechanical Backlash
The motor and lead screw are integrated at the factory, eliminating the need for secondary assembly and alignment. This avoids the backlash typically introduced by couplings, resulting in a streamlined structure and a more compact equipment layout.
2. Precise Pulse-Based Positioning with Adjustable Micro-stepping
Displacement is controlled by the number of pulses; when combined with micro-stepping settings on a stepper driver, this enables micron-level fine-tuning. The system operates smoothly at low speeds, making it ideal for point-to-point reciprocating positioning.
3. Self-Locking T-Thread for Position Retention During Power Loss
The T-thread utilizes friction to provide a self-locking function, allowing the system to maintain the position of a load-even in vertical applications-without the need for an additional brake. This simplifies both the control circuitry and the wiring.

| Type | Hybrid Lead Screw Stepper Motor |
| Standard step angle |
1.8°
|
| Rated voltage |
DC 12V/24V/36V
|
| Single-phase rated current |
1.5A-3.0A/Phase
|
| Phase resistance/inductance |
1.0-1.5Ω / 3.0-4.5mH
|
| Holding torque |
0.4-2.8N·m
|
| Wiring method | 4-wire bipolar connection |
| Operating temperature |
-15℃~+60℃
|
| Protection rating |
IP40
|
| Insulation class | B |


* For more sizes, please contact our sales team












Q1: What is the primary difference between a lead-screw stepper motor and a standard rotary stepper motor?
A1: A lead-screw stepper motor features an integrated lead-screw mechanism, allowing it to produce linear motion directly. In contrast, a standard rotary stepper motor produces only rotary motion; to achieve linear motion, it requires additional components-such as a lead-screw module or a timing belt system-which results in a more complex structure and a higher likelihood of introducing backlash.
Q2: Are open-loop lead-screw stepper motors prone to losing steps?
A2: They can lose steps due to overloading, excessively high acceleration settings, or excessive speed. If your operating conditions involve significant load fluctuations and position deviations are not acceptable, it is recommended to choose a closed-loop lead-screw stepper motor equipped with an encoder.
Q3: What is the maximum possible length for a lead screw, and will it wobble if it's too long?
A3: The longer a lead screw is, the more prone it becomes to vibration at high speeds; for long, slender lead screws, it is generally advisable to reduce the operating speed. For applications with an extra-long travel distance, adding external guide shafts for auxiliary support is recommended to improve stability.
Hot Tags: screw stepper motor, China screw stepper motor manufacturers, suppliers, factory
Previous
NMRV Worm Gear ReducerYou Might Also Like
Send Inquiry














