10 Hp Single Phase Motor
Phase: Single-phase
Typical Voltage: 110V/ 220V / 230V / 240V AC
Frequency: 50 Hz or 60 Hz
10 HP (≈7.5 kW) single-phase motor is a high-power AC induction motor designed to run on standard single-phase electrical power (typically 220V-240V). It is the most powerful option readily available for facilities without three-phase power, widely used in industrial, agricultural, and commercial heavy-duty equipment.
- With a substantial output of 10 HP (7.5 kW), this model ranks among the higher-powered single-phase motors available, making it ideally suited for locations where three-phase power is unavailable.
- Its dual-capacitor configuration-utilizing both a start capacitor and a run capacitor-delivers high starting torque and robust load-bearing capacity, ensuring smooth operation with minimal noise.
- Boasting excellent starting performance, the motor features a built-in centrifugal switch that automatically disconnects the start capacitor once the rotational speed reaches the required level; this generates a high starting current, enabling the motor to effortlessly drive heavy loads.
|
Model |
10hp dual-capacitor motor |
|
Frame |
132 |
|
Power |
10HP 7.5KW |
|
Poles |
2 poles / 4 poles / 6 poles |
|
Voltage |
110V/220V/230V, or customization |
|
Frequency |
50HZ/60HZ |
|
Motor shaft diameter |
Φ38 |
|
Cooling |
IC411 Fan cooling |
|
Protection |
IP44/IP54/IP55 |
|
Housing |
Aluminum/Cast Iron |
|
Wire |
100% copper |
|
Color |
Blue, silver, or customization |
|
Duty |
S1 |
|
Capacitor |
Dual capacitors (start&running) |
FAQ
Q1: Why is a 10HP single-phase motor more expensive and larger than a three-phase motor of the same power rating?
A1: Single-phase motors inherently face difficulties during startup, necessitating additional components-such as capacitors and centrifugal switches-and feature more complex winding designs; consequently, both their physical size and manufacturing cost exceed those of a three-phase motor with an equivalent power output.
Q2: Can a 10HP single-phase motor be reversed?
A2: Yes, it can. Generally, reversal is achieved by swapping the connections of either the main winding or the auxiliary winding. However, frequent switching between forward and reverse rotation is not recommended, as it can easily damage the centrifugal switch and the capacitor.
Q3: Can this be used to drive water pumps, air compressors, or cutting machines?
A3: Yes. As long as the power and torque ratings of the equipment are compatible, it is commonly used for water pumping, air compression, woodworking machinery, small conveyors, agricultural machinery, and similar applications.
Hot Tags: 10 hp single phase motor, China 10 hp single phase motor manufacturers, suppliers, factory
Previous
No InformationYou Might Also Like
Send Inquiry