Ball Screw Stepper Motor
What is a Ball Screw Stepper Motor?
An integrated ball-screw stepper motor is a linear drive unit that combines a two-phase hybrid stepper motor with a precision ball-screw assembly. It utilizes recirculating steel balls within the nut to achieve rolling-contact motion, directly converting electrical pulse signals into high-precision linear displacement. Compared to stepper motors using trapezoidal (lead) screws, the ball-screw design offers higher transmission efficiency and supports high-speed, high-frequency reciprocating motion; it can also be configured with a preloaded, anti-backlash nut to minimize axial play. Available in various structural configurations-including external-drive, hollow-shaft (through-shaft), and fixed-shaft designs-these motors cover standard NEMA 8 to NEMA 34 flange sizes. Ball screws are offered in C7 (cold-rolled) or C5 (ground) precision grades. Ideally suited for automated production lines requiring high speed, long service life, and stable, repeatable linear positioning, this solution provides high performance within a cost-effective, open-loop framework. It can also be upgraded to a closed-loop system by adding an encoder to prevent the loss of steps.




1. Rolling-contact drive mechanism: high efficiency and low heat generation
By replacing the sliding friction of traditional threaded screws with the recirculating motion of steel balls, this mechanism achieves a transmission efficiency of over 90%. It generates less heat in the motor for a given level of thrust, making it ideal for prolonged, high-frequency reciprocating operation-avoiding the rapid temperature rise and wear typically seen with trapezoidal (T-thread) lead screws.
2. Optional preload for backlash elimination and consistent positioning
Supports configurations such as dual-nut or shim-based preloading, which effectively eliminate backlash. This minimizes displacement errors during directional changes and ensures stable, repeatable positioning-perfect for applications like repetitive pick-and-place tasks or inspection-based focusing.
3. High-speed linear feed with superior dynamic response
Low frictional resistance enables higher travel speeds and accelerations, making it well-suited for rapid, short-stroke point-to-point positioning. Furthermore, at high operating speeds, it exhibits significantly less vibration and drag compared to trapezoidal lead screw systems.

| Type | Hybrid Lead Screw Stepper Motor |
| Standard step angle |
1.8°
|
| Rated voltage |
DC 12V/24V/36V
|
| Single-phase rated current |
1.5A-3.0A/Phase
|
| Phase resistance/inductance |
1.0-1.5Ω / 3.0-4.5mH
|
| Holding torque |
0.4-2.8N·m
|
| Wiring method | 4-wire bipolar connection |
| Operating temperature |
-15℃~+60℃
|
| Protection rating |
IP40
|
| Insulation class | B |


* For more sizes, please contact our sales team












Q1: How do you decide between a ball screw stepper motor and a lead screw (trapezoidal screw) stepper motor?
A1: For applications involving high-frequency reciprocating motion, high-speed feeding, a need for minimal long-term wear, or low heat generation, a ball screw is the preferred choice. For scenarios involving low-speed intermittent motion, light vertical loads, a requirement for self-locking when powered off, or budget constraints, a lead screw (trapezoidal screw) is the better option. Note that ball screws do not have an inherent self-locking feature.
Q2: Can the Ball Screw Stepper Motor be used directly for a vertical lifting mechanism?
A2: Yes, but the standard version does not include a self-locking feature; for vertical installations, you must select the optional power-off brake. Note that this brake is intended solely for holding the load when power is lost; it is not suitable for dynamic braking.
Q3: Is it easy for the steel balls inside a ball screw to fall out?
A3: Standard nuts are equipped with a circulation retainer, so the balls will not fall out under normal operating conditions. However, unauthorized disassembly of the nut, subjecting it to heavy impact, or forcibly pulling on the screw shaft can cause the steel balls to scatter-and once they are scattered, reassembling them on-site is extremely difficult.
Hot Tags: ball screw stepper motor, China ball screw stepper motor manufacturers, suppliers, factory
Previous
High Precision Servo MotorYou Might Also Like
Send Inquiry














