Three Stage Planetary Gearbox
What is a Three Stage Planetary Gearbox?
The three-stage planetary gearbox features a modular design, utilizing three planetary transmission modules connected in series. By leveraging the principle of load sharing and distribution across multiple planetary gears, it achieves an exceptionally high reduction ratio within a compact, coaxial, in-line configuration. It is specifically engineered to address transmission challenges that require extremely low output speeds and sustained, heavy-duty operation. The gearbox incorporates an optimized helical gear mesh design, balancing high load-bearing capacity with smooth, quiet operation. It supports direct mounting of asynchronous motors, servo motors, and hydraulic motors, while its modular housing allows for the easy integration of sealing, cooling, or anti-reverse components tailored to specific operating conditions. Compared to configurations involving multiple cascaded speed reducers, this design minimizes backlash and alignment issues-common drawbacks of intermediate connecting mechanisms-making it ideal for heavy-duty industrial applications characterized by continuous, long-term operation and periodic shock loads. It serves as a reliable, standardized power-distribution component for heavy-load, low-speed transmission systems.
Models




Types: P2N,P2L,P2S,P2K,P3N,P3S,P3K
Features
1. Modular three-stage integration reduces potential failure points in the transmission train.
Designed as a single, integrated unit, it eliminates the need to couple multiple gear reducers together. By removing intermediate components such as couplings and adapter flanges, the design minimizes risks related to assembly misalignment, loosening, and oil leakage. This results in a more stable transmission chain and a more compact installation footprint.
2. Helical, case-hardened gear design with load-sharing capability for cyclic impact resistance.
The gears are crafted from 20CrMnTi steel-carburized, quenched, and precision-ground-featuring a high contact ratio that distributes loads across multiple planetary gears. This configuration effectively withstands the cyclic impact loads typical of mixing, feeding, and crushing operations, while providing superior resistance to tooth-surface pitting.
3. Wide gear-ratio range, enabling ultra-low output speeds from a single unit.
A single three-stage unit covers an extensive range of gear ratios, eliminating the need for an additional secondary reduction stage. This provides a streamlined solution for applications requiring low-speed operation-down to just a few revolutions per minute, or even less than one revolution per minute.
Products Description

Specifications



Our advantages



Company Profile





Product Range:
Gear reducers, worm gear reducers, and electric motors, etc.
Core Advantages
Customized production, extensive export experience;
Service Scope:
Integrated product export, technical support, and after-sales guarantee.

FAQ
Q1: Does a three-stage planetary gearbox generate significantly more heat loss compared to a two-stage one?
A1: Yes. Every stage of transmission incurs losses; therefore, a higher number of stages results in greater heat generation under the same operating conditions. Two-stage planetary gearboxes are preferred for gear ratios up to 100. A three-stage configuration is more suitable when the gear ratio exceeds 100 or when operating at extremely low speeds-in such cases, it is essential to verify the thermal capacity during the selection process.
Q2: Can a backstop serve as a substitute for a holding brake?
A: No. A backstop is designed solely to prevent a load from rotating in the reverse direction; it lacks dynamic braking capability. If the equipment requires braking to a stop or needs to maintain a specific position, a separate holding brake must be installed.
Q3: Is the lubricating oil pre-filled in the gearbox at the factory suitable for direct export to regions with low temperatures?
A3: The standard, factory-filled oil is suitable for typical environments above -15°C. For exports to cold regions, a low-temperature-rated gear oil must be specified in advance; otherwise, the oil could solidify in the cold, leading to inadequate lubrication during startup and potential damage to the gears.
|
|
|
|||
|
|
||||
Hot Tags: three stage planetary gearbox, China three stage planetary gearbox manufacturers, suppliers, factory
Previous
Planetary GearheadYou Might Also Like
Send Inquiry





































