
VF44 Gearbox
What is a VF44 Gearbox?
The VF44 worm gear reducer is a well-balanced, right-angle drive unit from the VF series, featuring a circular housing design that bridges the gap between light-duty and medium-duty applications. The unit is encased in a die-cast aluminum alloy housing with evenly spaced, circumferential cooling ribs, ensuring stable thermal management. Its compact dimensions offer a versatile middle ground-overcoming the load limitations of the smaller VF30 while remaining more space-efficient than the VF49. Internally, it utilizes a precision-ground worm made of carburized and quenched 20CrMnTi steel, paired with a high-tin bronze worm gear; this combination ensures smooth meshing and superior wear resistance compared to standard bronze gears.
The VF44 comes standard with a hollow output bore and supports various configurations, including single or dual solid output shafts and hollow shafts with locking discs. The input side features a standard IEC flange, compatible with motors ranging from 0.12 kW to 0.75 kW; a version with an independent input shaft is also available. The symmetrically designed housing allows for mounting in any of six orientations, independent of the base orientation. Furthermore, two VF44 units can be coupled in series to achieve a two-stage reduction, enabling very high gear ratios and low-speed output. Each VF44 unit undergoes rigorous factory testing-including load break-in, seal leakage checks, and torque verification-and comes pre-filled with specialized synthetic lubricant for worm gears. Ready for immediate installation, the VF44 is widely used in automated light-industrial equipment for 90-degree power transmission.



| Model | VF Series Worm Gear Reducer (VF30 / VF40 / VF44 / VF49 / VF63 / VF72 / VF86 / VF110) |
| Housing | Die-cast aluminum alloy |
| Single-stage gear ratio | 7.5,10,15,20,25,30,40,50,60,80,100 |
| Rated torque | 12 ~ 220 N・m |
| Input power | 0.09 ~ 3.0 kW |
| Input | IEC flange direct mount, input shaft version |
| Output | standard hollow shaft, single-sided solid shaft, double-sided solid shaft, hollow shaft with locking disc |


NMRV gearbox structure













Q1: What are the limitations when using the VF44 in combination with a UD stepless speed variator?
A1: They can be directly coupled to achieve both stepless speed variation and gear reduction. However, long-term operation at low speeds is not recommended, as the splash lubrication becomes insufficient, which accelerates wear on the worm gear.
Q2: Is it normal for the VF44 housing to feel warm during operation?
A2: Due to inherent transmission losses within the worm gear mechanism, slight heating of the housing is normal. However, if the housing becomes hot to the touch-or if there is persistent oil leakage or abnormal noise-this indicates an issue, and the unit should be shut down for inspection and repair.
Q3: Can the VF44 operate continuously for 24 hours a day when mounted on a horizontal base?
A3: It is suitable for 24-hour operation only under moderate, intermittent loads. Under continuous, long-term full-load operation, heat buildup becomes significant; in such cases, it is recommended to either reduce the operating load or switch to a heavy-duty, cast-iron model.
|
|
|
|||
|
|
||||
Hot Tags: vf44 gearbox, China vf44 gearbox manufacturers, suppliers, factory
Previous
NMRV Worm Gear ReducerNext
VF30 GearboxYou Might Also Like
Send Inquiry






























