Washdown Gearbox
What is a Washdown Gearbox?
The washdown gearbox is washable stainless steel helical gear reducer, it's a high-efficiency gear drive unit designed for production lines that undergo routine high-pressure spraying and chemical disinfection. The housing, flange, output shaft, and locking components are all constructed from austenitic stainless steel. The exterior features a smooth, rib-free design with no recessed holes or crevices where debris could accumulate, ensuring that cleaning fluids and residues can drain away rapidly during wash-down. Internally, it utilizes precision-ground helical gear sets, which offer high meshing efficiency and robust continuous load-bearing capacity-making it well-suited for long-term, continuous operation, unlike worm gear units.



Fully smooth, self-draining housing designed for daily washdown cycles
The exterior features no protruding cooling fins or recessed countersunk holes, and all joints utilize smooth, radiused transitions to eliminate "dead zones" where liquid could accumulate. This ensures rapid drainage of wash-water and residues, minimizing the buildup of proteins, sugars, and salt crystals, thereby reducing the effort required for daily cleaning.
Permanently laser-etched markings to eliminate contamination risks from labels
Technical specifications are laser-etched directly onto the stainless steel housing-no adhesive labels or rivet gaps. These markings remain intact and secure, even when subjected to repeated exposure to strong alkaline agents or chlorine-based cleaning chemicals.
Modular flange design for flexible motor integration
Equipped with an IEC-standard input flange, the unit is compatible with stainless steel asynchronous washdown motors and stainless steel brake motors. It supports both solid-shaft and hollow-shaft (with locking collar) output configurations, facilitating seamless integration with conveyor rollers, chains, and lifting mechanisms.

|
Model |
Stainless Steel Gear Motor |
|
Ratio |
5, 7.5, 10, 15,20, 25, 30, 40, 50, 60, 80, 100 |
|
Rated power |
0.06~4kW |
|
Output speed |
13~286rpm |
|
Output torque |
2.6~351Nm |
|
Output hollow shaft |
Φ18, Φ25, Φ28, Φ35 |
|
Noise |
60-68dB |
|
Spare parts |
Output flange, single output shaft, double output shaft, torque arm, dust cover |
|
Optional |
NEMA standard flange, shaft |













Our advantages








Q1: Can it be used with a variable-frequency motor for long-term operation at adjustable speeds?
A1: It is compatible with variable-frequency drives. For continuous operation at low speeds, pay attention to the effectiveness of the oil splash lubrication; for long-term operation at extremely low speeds, it is recommended to evaluate the need for a forced lubrication system.
Q2: Do the installation orientation and oil level affect the seal?
A2: Oil levels vary significantly depending on whether the unit is installed horizontally, vertically, or in an inverted (upside-down) position; therefore, please be sure to specify the installation orientation when placing your order. Units are filled with oil at the factory according to the specified orientation. If the oil level is too high, it may overflow as the unit heats up during operation; if the oil level is too low, the gear surfaces will lack sufficient lubrication, leading to wear.
Q3: What are the requirements for the shelf life and storage of food-grade gear oil?
A3: When left unopened and stored in a cool, dark place at room temperature, the typical shelf life is 3 years. Once added to a gearbox, the oil change interval should be determined based on actual operating conditions. It is strictly prohibited to store or use H1-grade lubricants together with industrial gear oils.
|
|
|
|||
|
|
||||
Hot Tags: washdown gearbox, China washdown gearbox manufacturers, suppliers, factory
Previous
NMRV Worm Gear ReducerYou Might Also Like
Send Inquiry











































