R2E180 Fan
What is the R2E150 Fan?
The R2E180 series consists of 180mm-diameter external-rotor, backward-curved centrifugal fans. Featuring a single-inlet, scroll-free integrated design, these fans utilize aerodynamically optimized backward-curved impellers. Compared to the R2E150 series of the same size, they offer greater airflow and higher static pressure capacity, making them well-suited for enclosed air ducts or heat-exchange chambers with higher resistance. The motor and impeller are integrated into a single unit, which includes a built-in running capacitor and thermal protection for the windings. Designed for a standard 230V single-phase AC input, the series is compatible with both 50Hz and 60Hz power grids. Balancing the need for compact installation with robust, continuous cooling performance, these fans are widely used for forced ventilation in high-power frequency converters, laser equipment, air purification units, and boiler/HVAC heat-exchange systems. They also serve as a primary, direct-replacement model for EBM fans.






1. Non-overloading characteristic with backward-curved impellers for stable operation: The backward-curved blade design results in a flat power curve. This reduces airflow resistance and prevents power surges or overloading during free-air discharge, ensuring high safety during long-term, continuous operation.
2. Wider range of airflow and static pressure, suitable for high-resistance systems: Featuring a large 180mm diameter impeller, the unit maintains superior airflow even in high-resistance environments-such as those involving filters, long ductwork, or heat exchangers-with minimal performance degradation.
3. Compact, integrated external-rotor design: The motor is embedded within the impeller, eliminating the need for an external volute housing. With a standard circular flange, it can be mounted directly onto equipment panels, saving valuable internal space.
4. Dual ball-bearing system for long service life and low vibration: Supported by a pair of ball bearings and factory-balanced for dynamic stability, the unit offers excellent vibration suppression. It is rated for S1 continuous duty, making it ideal for equipment that requires 24/7, unattended operation.

|
Model |
AS150/AS180 |
|
Voltage |
230VAC, Single-Phase |
| Max torque | 18000Nm |
|
Speed |
2300rpm |
| Rotation |
CCW, viewed toward rotor
|
| Motor protection | Thermocontact 150±5°C |
| Insulation class |
F |
| Temperature rise | 95K max |
| Mounting type | Side or horizontal rotor installation |














Q: Under what conditions should the performance curve of the R2E180 fan be referenced?
A: The performance curve is measured under standard atmospheric pressure, a rated voltage of 230V, and using clean air at ambient temperature. Factors such as site altitude, ambient temperature, duct bends, and filters will alter the actual output; therefore, the values cannot be directly compared against the nominal airflow specified on the nameplate.
Q: Can the R2E180 fan directly replace an EBM fan of the same model?
A: Yes, it can. The flange mounting dimensions, airflow direction, and electrical parameters are designed to be compatible. As a domestic alternative, it fits the existing ductwork and electrical control structure of the original equipment; simply verify the voltage and performance curve when performing the replacement.
Q: Is the R2E180 fan suitable for conveying air that contains small amounts of oil mist or fumes?
A: The standard version is not suitable for the long-term transport of oil mist or fumes. Oil mist can accumulate on the surfaces of the impeller, bearings, and windings, which may clog air passages and accelerate bearing failure.
|
|
|
|||
|
|
||||
Hot Tags: r2e180 fan, China r2e180 fan manufacturers, suppliers, factory
Previous
Bevel Planetary GearboxNext
R2E150 FanYou Might Also Like
Send Inquiry

































