Worm Drive Gearbox
video

Worm Drive Gearbox

The WP series integrated worm gear reduction motor is a complete right-angle drive unit, consisting of a cast-iron worm gear reducer and an electric motor that are pre-assembled, run-in, and calibrated at the factory.
Send Inquiry
Product Introduction

What is a Worm Drive Gearbox?

The WP series of worm gear reduction motors serves as a time-tested, foundational power transmission component for heavy-duty industrial applications. Unlike lightweight aluminum-alloy models, the WP series features a robust gray cast-iron housing, offering superior structural rigidity and thermal capacity-essential for demanding operating environments characterized by dust, mechanical shock, or continuous, heavy-load duty. The series encompasses various configurations, including the WPA, WPS, WPO, WPDA, and WPDS models; by varying the input shaft positioning and output orientation, these units can be adapted to a wide range of applications, from conveyor systems to industrial mixing equipment. This article examines the material design, model classification, selection and verification criteria, and maintenance essentials for the WP series, providing a practical guide for engineering specification and selection.

 

models

WPW gear boxes
WPW reducer
WPWDA gear reudcer
WPWDA
WPWDK gearbox
WPWDK reducer
WPWDKO gearbox
WPWDKO reducer
 
 

Features

1. Cast-iron housing for superior rigidity and stability: Both the front and rear housings are made of gray cast iron and feature reinforced ribbing. This design offers better vibration resistance and overload capacity compared to two-stage aluminum-housed units, making it well-suited for industrial environments characterized by intermittent shock loads and high dust levels.
 

2. 90° right-angle configuration for flexible layout: The unit maintains a right-angle transmission geometry, eliminating the need for additional adapter mechanisms. This facilitates easier integration into equipment frames with limited space, particularly where a low-speed, lateral output is required.
 

3. Inherent static self-locking capability (two-stage design): The two-stage structure provides a more pronounced self-locking effect than a single-stage design, helping to prevent the load from back-driving when power is cut. It should be noted that this self-locking feature serves only as an auxiliary positioning aid and cannot replace a dedicated safety brake.

 

 

Drawings

*WPW worm gearbox for example

 

WPW worm gearbox

worm reducer gearbox

 

worm and wheel gearbox

 

 

WP gearbox structure

 

electric motor worm gearbox

 

worm & worm wheel gearbox

 

Our advantage

worm motor gear

 

worm drive gearbox
worm gear manufacturers
worm & worm gear
 
worm gear set
worm gear speed reducer
worm reducer

 

Related WP Gearbox

 

right angle worm gearbox

 

brass worm gear

 

 

Application

WPA worm gearbox for conveyorWPA gearbox for chemical equipmentwp reducer for agricultural

 

ANJO DRIVE

 

ANJO GEARBOX

 

Company profile

 

product-321-180
product-329-184
product-247-139
product-319-190
 

ANJO

product-1338-290

 

ANJO Certificate

 

FAQ

 

Q1: Can a WP-series worm gear reducer be installed vertically? Is it necessary to adjust the oil level?

A1: Yes, it can. The WPO and WPX series are specifically designed for vertical output. However, please note that the distribution of lubricating oil in a vertical installation differs from that in a horizontal one, and some models have specific requirements regarding oil volume. Attempting to convert a horizontal-mount model for vertical installation may result in inadequate lubrication for the worm shaft bearings or oil seal leakage. It is recommended to select a model designed for the intended mounting orientation rather than attempting such modifications yourself.

Q2: Why can't a worm-gear shaft be used as an input shaft?

A2: This is a structural constraint inherent to worm-gear drive systems. The tooth surfaces of the worm gear (typically made of bronze) are designed for sliding engagement with a steel worm. If the worm gear is used as an input (driving the system in reverse), the contact stress and frictional conditions will deviate from the intended design parameters, which can easily lead to rapid tooth-surface wear or even galling (seizure). For the WP series, it is strictly prohibited to use the worm-gear shaft as an input shaft.

Q3: What is considered a normal temperature for the housing during operation?

A3: At an ambient temperature of 25°C, if the surface temperature of the housing does not exceed approximately 90–95°C (corresponding to an oil temperature near its upper limit) and remains stable without further increase, it is generally considered to be within the normal range. If the temperature continues to rise or if localized overheating occurs, you should check for overloading, low oil levels, or a clogged breather plug.

 

-1

NMRV worm gearbox

WP worm gearbox

Hypoid gearbox

Industrial gearbox

Screw jack

Bevel gearbox

Hanging gearbox

Shaft mounted gearbox

Industrial planetary gearbox

Precision planetary gearbox

RC gearbox

Micro gear motor

Medium gear motor

Vibration motor

Electric motor

Stainless steel motor

Stainless steel gearbox

Irrigation gear motor

Irrigation gearbox

 

Hot Tags: worm drive gearbox, China worm drive gearbox manufacturers, suppliers, factory

Send Inquiry

whatsapp

Phone

E-mail

Inquiry