Cycloid Motor
What is a Cycloid Motor?
The cycloidal gearmotor is a coaxial, integrated power unit developed based on the K-H-V planetary transmission principle with a small tooth-number difference. It consists of a three-phase asynchronous motor directly coupled to a cycloidal-pin gear reducer. At its core, an eccentric sleeve drives two cycloidal discs-offset by 180°-which engage synchronously with a circular arrangement of pins. This design allows for a high reduction ratio within a single stage. The unit features a coaxial input and output, resulting in a highly compact structure. Unlike worm gear reducers or conventional planetary gearboxes, this design is characterized by a high number of simultaneously engaged teeth and exceptional short-term resistance to impact overloads, making it well-suited for applications requiring frequent start-stop cycles or rapid reversals. Available in both single-stage and two-stage configurations, these units are ideal for heavy-duty industrial tasks such as mixing, conveying, feeding, and lifting. They can also be paired with brake motors or explosion-proof motors, serving as a proven, reliable solution for high-impact load scenarios in industrial environments.




1. Multi-tooth synchronous meshing with high overload and impact resistance
Multiple tooth surfaces share the load simultaneously during operation, providing a substantial margin for short-term peak loads. This ensures robust performance when handling material jams, mechanical shocks, or heavy-load startups-offering greater impact tolerance and reliability compared to standard involute gear reducers.
2. Wide single-stage gear ratio range with a compact design
A single stage can achieve high gear ratios ranging from 11:1 to 87:1, eliminating the need for multi-stage configurations. For applications requiring even lower output speeds, two-stage models are available; these avoid the need to stack multiple planetary modules, resulting in a shorter axial length and simplified equipment layout.
3. Coaxial configuration for flexible installation
The input and output shafts are aligned, supporting horizontal, vertical, or flange-mounted orientations. The same housing design is compatible with various mounting positions, requiring no additional redirection mechanisms-making it an ideal, low-effort solution for retrofitting or replacing legacy gear reducers.

|
Model |
Cyclo Gear Motor |
|
Type |
B/X Cycloidal Pin-wheel |
|
Power |
0.18-75 kW |
|
Rated speed |
1390rpm |
|
Ratio |
7:1~658503:1 |
|
Output speed |
0.18-206.4 rpm |
|
Output torque |
up to 29400 N.m |
|
Motor voltage |
380V. 440V. |
|
Motor frequency |
50HZ 60HZ |
|
Motor insulation |
F, H |


























FAQ
Q: Why do cycloidal reducers offer better impact resistance than conventional gear reducers?
A: In a cycloidal reducer, multiple pins mesh with the cycloidal disc simultaneously. This distributes the load across several contact points rather than concentrating it on just one or two teeth. Consequently, the unit is less prone to tooth breakage during brief, high-impact events, making it well-suited for handling sudden, unexpected loads-such as those caused by material jamming.
Q: Choosing between single-stage and two-stage cycloidal drives?
A: If a single-stage drive can meet your speed requirements, it should be the first choice; it offers higher efficiency, generates less heat, and is easier to maintain. A two-stage drive should only be used when an extremely low output speed or an exceptionally high gear ratio is required-the trade-offs being greater power loss and higher operating temperatures.
Q: Can a cycloidal reducer operate continuously for 24 hours a day?
A: Single-stage models can operate 24 hours a day, though their thermal capacity is lower than that of helical gear reducers. For continuous heavy-duty operation over 24-hour periods, a higher service factor (selection factor) must be applied, and oil temperature should be monitored regularly. For two-stage models, continuous, full-load operation over long periods is not recommended.
|
|
|
|||
|
|
||||
Hot Tags: cycloid motor, China cycloid motor manufacturers, suppliers, factory
Previous
NMRV Worm Gear ReducerYou Might Also Like
Send Inquiry


































