Hygienic Motor
video

Hygienic Motor

The Hygienic Motor is all-stainless-steel, corrosion-resistant asynchronous motor is constructed entirely from austenitic stainless steel—including the housing, end shields, output shaft, fasteners, and terminal box.
Send Inquiry
Product Introduction

What is the Hygienic Motor?

The Hygienic Motor is all-stainless-steel, corrosion-resistant asynchronous motor is constructed entirely from austenitic stainless steel-including the housing, end shields, output shaft, fasteners, and terminal box. It is engineered for harsh, corrosive environments characterized by high humidity, salt spray, acidic or alkaline mists, and intermittent water exposure. Unlike traditional cast-iron or aluminum-housed motors, which are prone to surface peeling and corrosion, this motor relies on the inherent corrosion resistance of its base material rather than protective surface coatings.

The design features a labyrinth-style water-blocking structure combined with dual-lip oil seals, providing effective protection against dust and splashing liquids. The windings are reinforced with vacuum-impregnated insulation (Class F) and are compatible with variable-frequency drives (VFDs). Options include both TENV (Totally Enclosed Non-Ventilated) and TEFC (Totally Enclosed Fan-Cooled) versions, catering to both continuous and intermittent duty cycles. Built to IEC standard frame dimensions, the motor is suitable for integration with gear reducers, pumps, fans, and conveyor systems. Each unit undergoes rigorous factory testing-including insulation withstand voltage, salt-spray aging, and no-load temperature rise tests-making it an ideal drive solution for applications in outdoor settings or "wet" industrial environments where frequent maintenance is difficult or impractical.

 

models

Stainless steel motor
IP69K motor
IP69 MOTOR
Water proof motor
Rustproof motor
Washable motor

Sainless steel motor specification

ITEAMS SPECIFICATIONS
Housing material Stainless Steel
Power 0.12kW~22kW
Voltage 220 / 230 / 380 / 400 / 415 / 575 / 690V
Protection IP55, IP66, IP69K
Efficiency IE3
Insulation class F
Work duty S1
Cooling method TENV(Natural cooling), TEFC(Fan cooling)
Installation B3/B5/B35 Universal Vertical/Horizontal Mounting
Ambient temperature
-20℃ ~ +40℃

 

Features

 

1. All-stainless steel construction-no risk of contamination from coating flakes
The housing, end caps, shaft, and fasteners are all made of stainless steel. With no paint or epoxy coatings, there is no risk of rapid corrosion following accidental impact or paint chipping-making this ideal for applications where coating debris must not contaminate the processed materials.
 

2. Labyrinth-style front water-deflection design-blocks water mist and salt spray
The shaft end features a rotating slinger ring combined with a labyrinth seal. Centrifugal force flings away splashing liquids, while an oil seal provides a secondary layer of protection. This configuration offers a significantly longer service life in environments saturated with water mist compared to setups using only an oil seal.
 

3. Two cooling options to suit varying load requirements
The TENV (Totally Enclosed Non-Ventilated) version is designed for intermittent loads, environments subject to frequent washdowns, or areas with high dust levels. The TEFC (Totally Enclosed Fan-Cooled) version offers superior heat dissipation, making it suitable for continuous full-load, long-duration operation-providing greater flexibility in equipment selection.

 

Our advantage

 

SS304 motor

Stainless motor
Hygienic motor
Washable motor
Food industry motor
304 material motor
304 steel motor
High efficiency motor
Water proof engine
Stainless steel engine

 

Application

Application introduction

product-1233-966

Related products

 

Types of Inox Worm Gearbox

Stainless steel gearbox
Stainless steel worm gearbox
Stainless steel reducer
Stainless steel worm reducer
SS304 Gearbox
SS304 gear reducer

 

 

product-1268-1438

 

product-1654-2232

 

Company profile

 

ANJO

company advantage

 

product-1-1

 

FAQ

 

Q1: Can a TEFC (Totally Enclosed Fan-Cooled) stainless steel motor-which uses an external fan for cooling-draw in water vapor?

A1: Yes, a fan-cooled design draws in ambient air. In environments with high levels of water mist or salt spray, a TENV (Totally Enclosed Non-Ventilated) model-which has no external fan-is the preferred choice. If a fan-cooled design is strictly required, an external air filtration system can be added to the intake.

Q2: Can the Hygienic Motor directly replace the existing cast-iron IE3 motor?

A2: The mounting dimensions are identical for the same frame size. However, you must verify the voltage, shaft diameter, and flange specifications. Additionally, consider any change in the unit's total weight and ensure that the mounting structure can support the load.

Q3: Can a brake be added to a stainless steel motor?

A3: Some models support customization. Please specify this when placing your order and verify the total length to ensure there is sufficient installation space.

 

 

-1

NMRV worm gearbox

WP worm gearbox

Hypoid gearbox

Industrial gearbox

Screw jack

Bevel gearbox

Hanging gearbox

Shaft mounted gearbox

Industrial planetary gearbox

Precision planetary gearbox

RC gearbox

Micro gear motor

Medium gear motor

Vibration motor

Electric motor

Stainless steel motor

Stainless steel gearbox

Irrigation gear motor

Irrigation gearbox

 

Hot Tags: hygienic motor, China hygienic motor manufacturers, suppliers, factory

Send Inquiry

whatsapp

Phone

E-mail

Inquiry