Washdown Motors
What is the Washdown Motors?
The washdown motors are drive units specifically engineered for production lines that require frequent high-pressure hosing and chemical disinfection. The entire external housing-including end shields, terminal boxes, and fasteners-is constructed from austenitic stainless steel. The motor features a smooth, cylindrical design without cooling fins, which eliminates crevices where debris could accumulate and facilitates thorough, large-scale washdown operations.
Unlike standard motors, these units are designed to withstand direct exposure to cold or hot water, acidic and alkaline cleaning agents, and chlorine-based disinfectants. They are ideal for applications in food processing, aquaculture, slaughtering, packaging, and wet-process chemical manufacturing. The windings utilize a fully encapsulated insulation system. These motors are available with IE3 high-efficiency ratings, support both IEC and NEMA mounting standards, and can be directly coupled with gear reducers, conveyor rollers, pumps, and cutting equipment. Every unit undergoes rigorous high-pressure spray testing, salt-spray durability testing, and dielectric withstand (insulation) testing before leaving the factory, making them an excellent choice for original equipment or replacement parts in environments subject to frequent, high-intensity washdowns.








| ITEAMS | SPECIFICATIONS |
| Housing material | Stainless Steel |
| Power | 0.12kW~22kW |
| Voltage | 220 / 230 / 380 / 400 / 415 / 575 / 690V |
| Protection | IP55, IP66, IP69K |
| Efficiency | IE3 |
| Insulation class | F |
| Work duty | S1 |
| Cooling method | TENV(Natural cooling), TEFC(Fan cooling) |
| Installation | B3/B5/B35 Universal Vertical/Horizontal Mounting |
| Ambient temperature |
-20℃ ~ +40℃
|

1. Integrated, smooth, rib-free housing-no dead zones for residue accumulation
The design eliminates traditional cooling ribs and features smooth, rounded transitions with minimal seams. This allows water and cleaning agents to flow away quickly, preventing the buildup of debris or biofilms, lowering the risk of microbial growth, and reducing the need for manual scrubbing.
2. Fully encapsulated stator windings for superior insulation stability
The stator is completely encapsulated in epoxy resin, which blocks the ingress of moisture and corrosive gases. Featuring Class F insulation, it offers enhanced resistance to impulse surges during variable-frequency operation, making it ideal for use with variable-frequency drives (VFDs).
3. Compatible with both IEC and NEMA mounting standards for flexible replacement
The same frame size supports B3, B5, and B14 flange configurations; NEMA-standard versions are also available.












Application introduction

Related products
Types of Inox Worm Gearbox













Q1: Can IP69K stainless steel washdown motors be subjected to direct exposure to high-temperature steam?
A1: Continuous exposure to steam is not recommended. The IP69K standard is designed for high-pressure, hot-water jetting; high-temperature steam will cause a sustained increase in internal pressure, which accelerates the aging of seals.
Q2: Will a fanless TENV (Totally Enclosed Non-Ventilated) unit overheat during prolonged full-load operation?
A2: TENV units rely on the enclosure for natural heat dissipation, and their design incorporates a thermal margin. When selecting a unit, a safety factor should be applied; continuous operation at full load-exceeding the rated power-is not recommended.
Q3: Can the motor terminal box be submerged directly in cleaning fluid?
A3: No. While the terminal box is designed to withstand spray-down cleaning, the cable connection points cannot endure continuous immersion. During installation, ensure the cable outlet faces downward to prevent accumulated liquid from seeping in along the cable.
|
|
|
|||
|
|
||||
Hot Tags: washdown motors, China washdown motors manufacturers, suppliers, factory
Previous
NMRV Worm Gear ReducerNext
Stainless MotorsYou Might Also Like
Send Inquiry


































