Inox Motor
video

Inox Motor

This Inox motor is a general-purpose industrial stainless steel three-phase asynchronous motor, it's a standard induction drive unit designed for a wide range of harsh operating environments, including those characterized by corrosion, high humidity, salt spray, or the presence of volatile chemical agents. The motor frame, end shields, output shaft, fan cover, and all fasteners are constructed from austenitic stainless steel.
Send Inquiry
Product Introduction

What is the Inox Motor?

The Inox motor, general-purpose industrial three-phase asynchronous induction motor is a long-lasting drive solution designed for corrosive industrial environments. Its exposed components-including the frame, end shields, output shaft, fasteners, and fan cover-are all constructed from austenitic stainless steel. This design eliminates reliance on surface coatings for corrosion protection, ensuring that the motor's integrity remains uncompromised even if it sustains physical impacts or abrasions.
The windings feature a moisture-resistant insulation system and come equipped with standard PTC temperature sensors for thermal protection. The motor supports continuous (S1) duty operation and is fully compatible with variable-frequency drive (VFD) speed control. It is available in two cooling configurations: Totally Enclosed Fan-Cooled (TEFC) and Totally Enclosed Non-Ventilated (TENV). Furthermore, the shaft-end utilizes a multi-layered sealing system combined with a pressure-balancing valve; this setup prevents internal condensation caused by thermal cycling and provides robust resistance against water mist, salt crystals, and splashes of chemical agents.

 

models

Stainless steel motor
IP69K motor
IP69 MOTOR
Water proof motor
Rustproof motor
Washable motor

Sainless steel motor specification

product-1236-579

 

Features

 

1. S1 Continuous-Duty Design: Engineered for Long-Term, Uninterrupted Operation
The electromagnetic design is optimized for continuous loads with ample thermal headroom, supporting 24/7 operation. Unlike many motors designed for intermittent start-stop cycles (such as those used in wash-down applications), this motor is ideal for pump stations, circulation fans, and continuous conveying equipment.

 

2. Flexible Cooling Options: Tailored to Dust and Environmental Conditions
The TEFC (Totally Enclosed Fan-Cooled) version offers superior heat dissipation, making it suitable for high-heat, full-load continuous operation. The TENV (Totally Enclosed Non-Ventilated) version prevents the intake of dust or salt crystals, making it the perfect choice for environments with high dust levels, water mist, or where the use of a cooling fan could lead to the ingress of contaminants.

 

3. Integrated PTC Thermal Protection: Early Warning for Overload and Overheating
Built-in thermistors (PTC) within the windings can be connected to an electrical control system to trigger overheating alarms or automatic shutdowns. This reduces the risk of winding burnout in unattended equipment operating in corrosive environments, thereby enhancing overall operational safety.

 

Our advantage

 

SS304 motor

Stainless motor
Hygienic motor
Washable motor
Food industry motor
304 material motor
304 steel motor
High efficiency motor
Water proof engine
Stainless steel engine

 

Application

Application introduction

product-1233-966

Related products

 

Types of Inox Worm Gearbox

Stainless steel gearbox
Stainless steel worm gearbox
Stainless steel reducer
Stainless steel worm reducer
SS304 Gearbox
SS304 gear reducer

 

 

product-1268-1438

 

product-1654-2232

 

Company profile

 

ANJO

company advantage

 

product-1-1

 

FAQ

 

Q1: Can a built-in PTC thermistor be used to shut down a motor directly?

A1: A PTC thermistor is merely a temperature-sensing component; it requires an associated variable-frequency drive (VFD) or a temperature-control relay to trigger an overheat alarm or an automatic shutdown. It does not, on its own, provide power-cutoff protection.

Q2: Can this Inox motor directly replace the existing cast-iron IE3 motor?

A2: The mounting dimensions, shaft diameter, and flange specifications are identical for the same frame size. However, you should verify the total weight of the unit and the cable outlet orientation. In some cases, older mounting structures may have load-bearing limitations or restricted space, so these factors should be confirmed in advance.

Q3: For TEFC (Totally Enclosed Fan-Cooled) stainless steel motors, is the fan cover also made of stainless steel?

A3: Yes, the fan cover on the fan-cooled version is made of stainless steel, which eliminates the rusting issues associated with cast-iron fan covers. However, since the fan-cooled design draws in ambient air, a TENV (Totally Enclosed Non-Ventilated) motor is the preferred choice for environments with high levels of dust or salt spray.

 

 

-1

NMRV worm gearbox

WP worm gearbox

Hypoid gearbox

Industrial gearbox

Screw jack

Bevel gearbox

Hanging gearbox

Shaft mounted gearbox

Industrial planetary gearbox

Precision planetary gearbox

RC gearbox

Micro gear motor

Medium gear motor

Vibration motor

Electric motor

Stainless steel motor

Stainless steel gearbox

Irrigation gear motor

Irrigation gearbox

 

Hot Tags: inox motor, China inox motor manufacturers, suppliers, factory

Send Inquiry

whatsapp

Phone

E-mail

Inquiry