Stainless Steel Drive
What is a Stainless Steel Drive?
The Stainless Steel Drive, a stainless steel worm gear reducer, featuring a square-shaped housing, is a right-angle drive unit designed for automated production lines that require high-pressure washdown and chemical sanitization. The housing is constructed with a precise, square geometry, offering flat surfaces and high-accuracy mounting references. The housing, flanges, output shafts, and all fasteners are crafted from austenitic stainless steel; they are left unpainted, relying instead on a passivated surface layer to resist corrosion from moisture, chlorine-based cleaning agents, and saline solutions.
Internally, the unit utilizes a hardened and ground worm paired with a high-tin bronze worm gear, ensuring smooth operation and high torque at low speeds. Models with high gear ratios also feature a self-locking capability. The sealing system incorporates a rotating water-shedding ring combined with multiple FKM (fluororubber) oil seals, effectively preventing the ingress of cleaning agents and condensation. The unit supports both standard oil lubrication and food-grade lubrication options. Equipped with an IEC-standard input flange, it can be directly coupled with stainless steel washdown-rated motors of the same protection class to form a complete right-angle geared motor assembly. Each unit undergoes rigorous factory testing-including high-pressure spray sealing tests, no-load break-in runs, torque verification, and periodic salt-spray testing. Ideally suited for applications such as hopper tilting, baffle positioning, small-scale mixing, and lateral product diversion, this reducer serves as an excellent, standardized square-mount drive solution for automated equipment in the food processing, aquaculture, and personal care/household chemical industries.



1. Rectangular housing designed for standard rack mounting
The housing features a square, uniform shape with flat top and bottom surfaces. Precision-machined reference planes allow for direct compatibility with the mounting bases and connecting plates used in the vast majority of automated equipment. This eliminates the need for custom adapter plates, thereby reducing machining costs.
2. Concealed fastener design to minimize debris accumulation
All bolt heads are recessed, leaving no exposed protrusions. Housing joints are ground flush to eliminate gaps where food residues-such as proteins, sugar, or salt-could otherwise become trapped, facilitating thorough wash-down cleaning at the end of each shift.
3. Flexible lubrication options to suit specific requirements
For standard operating conditions, the unit is supplied with synthetic worm gear oil, which supports routine maintenance and periodic oil changes. For applications where the unit is positioned near food-handling areas-posing a risk of product splashing-it can be pre-filled with NSF H1 food-grade lubricant, ensuring compliance with food industry safety standards even in the event of minor leakage.

|
Model |
Stainless Steel Gear Motor |
|
Ratio |
5, 7.5, 10, 15,20, 25, 30, 40, 50, 60, 80, 100 |
|
Rated power |
0.06~4kW |
|
Output speed |
13~286rpm |
|
Output torque |
2.6~351Nm |
|
Output hollow shaft |
Φ18, Φ25, Φ28, Φ35 |
|
Noise |
60-68dB |
|
Spare parts |
Output flange, single output shaft, double output shaft, torque arm, dust cover |
|
Optional |
NEMA standard flange, shaft |













Our advantages








Q1: Can this square-type worm gear unit be used directly in an outdoor, open-air environment?
A1: While the stainless steel housing can withstand rain and humid air, the IP69K rating applies only to directional spray/washdown; it is not designed to resist long-term sun exposure or the persistent ingress of windblown dust and sand. For outdoor use, it is recommended to install a protective cover (shielding against sun and rain) and to periodically clean any dust from the surface of the breather valve.
Q2: Is it possible to install a sprocket or a synchronous belt pulley on the output end of a gearbox? Are there any precautions to keep in mind?
A2: Yes, you can install a sprocket or a synchronous belt pulley. The key is to control the radial load, ensuring it does not exceed the maximum bearing load capacity specified in the product documentation. Additionally, the sprocket should be positioned as close to the gearbox housing as possible; this minimizes the bending stress caused by an excessive overhang, thereby preventing premature bearing failure.
Q3: What are the requirements for the shelf life and storage of food-grade gear oil?
A3: When left unopened and stored in a cool, dark place at room temperature, the typical shelf life is 3 years. Once added to a gearbox, the oil change interval should be determined based on actual operating conditions. It is strictly prohibited to store or use H1-grade lubricants together with industrial gear oils.
|
|
|
|||
|
|
||||
Hot Tags: stainless steel drive, China stainless steel drive manufacturers, suppliers, factory
Previous
SS GearboxNext
Washdown GearboxYou Might Also Like
Send Inquiry











































